PWM fildle solenoid

A forum for discussing topics of particular interest to those running MegaSquirt in Australia and New Zealand, including parts sources, group buys, etc.
Post Reply
Metalfab_101
Helpful Squirter
Posts: 61
Joined: Fri Mar 11, 2005 10:30 pm
Location: Qld, Australia

PWM fildle solenoid

Post by Metalfab_101 »

I'm looking for a donor for a Fidle valve suitable for PWM operation.

Any suggestions?

thanks!

Damo.
Prior preperation and planning prevents piss poor performance
devojet
Helpful Squirter
Posts: 82
Joined: Tue Jun 05, 2007 7:40 pm
Location: Gold Coast

Re: PWM fildle solenoid

Post by devojet »

Falcon EF EL AU, bolted to the top of TB with two bolts. Can be taped to fit hose tails. It is nice and small unit.

RX7 seires 4 and 5. Mounted somewhere on the side of the manifold. Has a blue top.

That's just two I have used.

Cheers

Daniel.
26 Chev hotrod with a 1UZFE and MS3x, Flex fuel, GPIO Transmission control and LCDash.
LS3 powered Race boat with MS3pro and GPIO.
MS2 on a 22r in a Hilux (mates car).
MS2extra on a turbo EF Falcon (brothers car).
Toyota Supra 1jz MS2extra, COP.
13B Turbo MS2extra.
Stag76
MegaSquirt Newbie
Posts: 12
Joined: Tue May 09, 2006 4:56 pm
Location: Toowoomba Qld australia

Re: PWM fildle solenoid

Post by Stag76 »

Hyundai (Excel etc) have a three wire Bosch valve that works well and is easy to fit. It uses approx. 3/4" hoses attached by clips. It also needs a 50watt 30ohm resistor that can be obtained from Farnell for about $10.
wagon
Helpful Squirter
Posts: 92
Joined: Sun Jul 17, 2005 4:10 am
Location: Toowoomba, QLD, Australia

Re: PWM fildle solenoid

Post by wagon »

If you can find one EFI XF Falcons have a good one with hose tails 'built in'.
1984 Ford Falcon 250ci inline 6 MS'd of course!

Now improved the way Ford should have built it with a 4speed automatic.

Also with 3.45 LSD for added goodness.

If you are hitting your head up against a wall it always feels better when you stop.
Post Reply