cc'ing combustion chambers
-
- Helpful Squirter
- Posts: 61
- Joined: Fri Mar 11, 2005 10:30 pm
- Location: Qld, Australia
cc'ing combustion chambers
Has anyone got a glass/perspex plate to measure combustion chamber volume?
Re: cc'ing combustion chambers
I have some 10mm acrylic that my brother got out of the bin of a plistics supplier. its about 700mm x 200mm. you could have a piece of it if you want to visit the Gold Coast.
cheers
Daniel.
LS3 powered Race boat with MS3pro and GPIO.
MS2 on a 22r in a Hilux (mates car).
MS2extra on a turbo EF Falcon (brothers car).
Toyota Supra 1jz MS2extra, COP.
13B Turbo MS2extra.
-
- Helpful Squirter
- Posts: 61
- Joined: Fri Mar 11, 2005 10:30 pm
- Location: Qld, Australia
Re: cc'ing combustion chambers
Thanks Dan!devojet wrote:If you find a plastics supplier they sould have plenty scraps that would do the job.
I have some 10mm acrylic that my brother got out of the bin of a plistics supplier. its about 700mm x 200mm. you could have a piece of it if you want to visit the Gold Coast.
cheers
Daniel.
I'm trying to find something locally but if that doesnt work out i'll give you a yell. I have to drop off a PC down the coast at some stage so I could drop in. I'll PM you when I know what im doing.
cheers,
Damo.
Re: cc'ing combustion chambers
use the lid of a single cd container ,drill a small hole centrally and put a light smear of grease around the edge of the combustion chamber,,do you have a graduated syringe to use,????????????
cheers
clyde
still
-
- Helpful Squirter
- Posts: 61
- Joined: Fri Mar 11, 2005 10:30 pm
- Location: Qld, Australia
Re: cc'ing combustion chambers
CD case eh Clyde? That's so crazy it just might work!!!cwest wrote:Hi Damo
use the lid of a single cd container ,drill a small hole centrally and put a light smear of grease around the edge of the combustion chamber,,do you have a graduated syringe to use,????????????
cheers
clyde
still
I have a syringe to use for measuring.
thanks!!
Damo
Re: cc'ing combustion chambers
clyde
-
- Helpful Squirter
- Posts: 61
- Joined: Fri Mar 11, 2005 10:30 pm
- Location: Qld, Australia
Re: cc'ing combustion chambers
-
- Helpful Squirter
- Posts: 61
- Joined: Fri Mar 11, 2005 10:30 pm
- Location: Qld, Australia
Re: cc'ing combustion chambers
Re: cc'ing combustion chambers
i am still