Is that some sort of rally car you're building there PugMonkey?PugMonkey wrote:Aaaawwwww super! I have the electronics work shop but only a single car garage and a set of car ramps. ...lol
Here is a link to show I have been up too
http://s1001.photobucket.com/albums/af1 ... 1QQtppZZ20
Oldie but a Newbie
-
- Helpful Squirter
- Posts: 92
- Joined: Sun Jul 17, 2005 4:10 am
- Location: Toowoomba, QLD, Australia
Re: Oldie but a Newbie
Now improved the way Ford should have built it with a 4speed automatic.
Also with 3.45 LSD for added goodness.
If you are hitting your head up against a wall it always feels better when you stop.
Re: Oldie but a Newbie
I bought it with a blown engine and it's just grown from there. I have raced it a few times but reliability for the trip to work on the following Monday suffers badly. It has the larger Peugeot 405 Mi16 engine which certainly was a shoe-horn job but all goes well. Now looking to go MSII
Mark
-
- Helpful Squirter
- Posts: 92
- Joined: Sun Jul 17, 2005 4:10 am
- Location: Toowoomba, QLD, Australia
Re: Oldie but a Newbie
Now improved the way Ford should have built it with a 4speed automatic.
Also with 3.45 LSD for added goodness.
If you are hitting your head up against a wall it always feels better when you stop.
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Wed May 11, 2011 8:47 pm
Re: Oldie but a Newbie
My names Steve and I am also a newbie at all this. I am a radio tech by trade and know enough about engines to get out of trouble most times,also haven't grown up. I have MS'ed a Holden 308 with VN-P heads and factory EFI hardware and fitted this to a timber ski boat that I built. I have a MSII V3 with MSIIextra 3.1.0 wasted.
If you guys were still interested in getting together someplace sometime this would be great. I am having some bother with the engine stopping after the ASE has expired. Cheers.
Re: Oldie but a Newbie
Where are you located?
If it is stalling after ASE times out then your VE table is probably too lean, or your required fuel is too low.
Cheers
Daniel.
LS3 powered Race boat with MS3pro and GPIO.
MS2 on a 22r in a Hilux (mates car).
MS2extra on a turbo EF Falcon (brothers car).
Toyota Supra 1jz MS2extra, COP.
13B Turbo MS2extra.
Re: Oldie but a Newbie
no problems with traveling and buying a round and would love to catch up with people. So for now i will be flooding these forums with questions that i cannot get from the manual, all 190 pages of it. MMMM reading.
Re: Oldie but a Newbie
its been a couple of years since we tryed a get together how about a christmas early december (11-12 dec) weekend?wagon wrote: It must be time to put the grog in the fridge and get prepared for a get-together. Anyone have any ideas for a date?
would like to meet a few locals
neil
-
- Helpful Squirter
- Posts: 92
- Joined: Sun Jul 17, 2005 4:10 am
- Location: Toowoomba, QLD, Australia
Re: Oldie but a Newbie
Any excuse to have some red cordial.litldv8 wrote:its been a couple of years since we tryed a get together how about a christmas early december (11-12 dec) weekend?wagon wrote: grog
would like to meet a few locals
neil
Now improved the way Ford should have built it with a 4speed automatic.
Also with 3.45 LSD for added goodness.
If you are hitting your head up against a wall it always feels better when you stop.
-
- Helpful Squirter
- Posts: 92
- Joined: Sun Jul 17, 2005 4:10 am
- Location: Toowoomba, QLD, Australia
Re: Oldie but a Newbie
Rum
Rum
Puts hairs onya
.
.
.
.
.
.
..
Mum.
Now improved the way Ford should have built it with a 4speed automatic.
Also with 3.45 LSD for added goodness.
If you are hitting your head up against a wall it always feels better when you stop.