Page 1 of 1
PWM fildle solenoid
Posted: Tue May 25, 2010 2:28 pm
by Metalfab_101
I'm looking for a donor for a Fidle valve suitable for PWM operation.
Any suggestions?
thanks!
Damo.
Re: PWM fildle solenoid
Posted: Tue May 25, 2010 6:52 pm
by devojet
Falcon EF EL AU, bolted to the top of TB with two bolts. Can be taped to fit hose tails. It is nice and small unit.
RX7 seires 4 and 5. Mounted somewhere on the side of the manifold. Has a blue top.
That's just two I have used.
Cheers
Daniel.
Re: PWM fildle solenoid
Posted: Wed May 26, 2010 2:08 pm
by Stag76
Hyundai (Excel etc) have a three wire Bosch valve that works well and is easy to fit. It uses approx. 3/4" hoses attached by clips. It also needs a 50watt 30ohm resistor that can be obtained from Farnell for about $10.
Re: PWM fildle solenoid
Posted: Sat May 29, 2010 2:59 pm
by wagon
If you can find one EFI XF Falcons have a good one with hose tails 'built in'.