What's everyone upto nowadays?
-
- Helpful Squirter
- Posts: 92
- Joined: Sun Jul 17, 2005 4:10 am
- Location: Toowoomba, QLD, Australia
What's everyone upto nowadays?
What's doin' in the world of megasquirts? What are the latest projects?
I've got a wideband now, so we'll be doing some serious tuning in the coming weeks.
Now improved the way Ford should have built it with a 4speed automatic.
Also with 3.45 LSD for added goodness.
If you are hitting your head up against a wall it always feels better when you stop.
Re: What's everyone upto nowadays?
http://jbperf.com/quad_ign_inj/index.html
Which wideband did you go with?
Re: What's everyone upto nowadays?
I now have a couple of widebands. I have a techedge 2A1 and now have the 14point7.com SLC OEM wideband that I plan to intergrate into my dyno controller.
Cheers
Daniel.
LS3 powered Race boat with MS3pro and GPIO.
MS2 on a 22r in a Hilux (mates car).
MS2extra on a turbo EF Falcon (brothers car).
Toyota Supra 1jz MS2extra, COP.
13B Turbo MS2extra.
-
- Helpful Squirter
- Posts: 92
- Joined: Sun Jul 17, 2005 4:10 am
- Location: Toowoomba, QLD, Australia
Re: What's everyone upto nowadays?
Now improved the way Ford should have built it with a 4speed automatic.
Also with 3.45 LSD for added goodness.
If you are hitting your head up against a wall it always feels better when you stop.
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue May 04, 2004 5:54 pm
- Location: Melbourne, Australia
- Contact:
Re: What's everyone upto nowadays?
This is my first post in about 5 years.... How time flies.
I got my bike running with a megasquirt V1 board way back in March of 2006. Got it running pretty well, actually. Then turned around and bought a new bike with all the bells 'n whistles, so the MS bike got shoved to the back of the shed and forgotten about.
Looking forward to finding time to actually get the old bike back on the road again.
What new things have happened whilst I've been away??
Cheers,
V
Re: What's everyone upto nowadays?
I got my hot rod to a point where I could get the engine running. The 1uz V8 runs great with it's ITB's and just the base fuel and ignition tables that come with the MS2 firmware. After reading other peoples troubles with ITB's I was suprised how well my engine runs. On first start it idled at 1200rpm and with a few adjustments I got it down as low as 650rpm with 40kpa vaccum. I also have a GPIO set up for trans control but I don't have a long enough drive way to get out of first gear. Plus the hot rod doesn't have an exhaust on it yet.
I picked up a retarder for my dyno to replace the disk brake set up, so I have been working on modifying the bed to suit. So hoppfully it wont be long before I have it up and running.
Cheers
Daniel.
LS3 powered Race boat with MS3pro and GPIO.
MS2 on a 22r in a Hilux (mates car).
MS2extra on a turbo EF Falcon (brothers car).
Toyota Supra 1jz MS2extra, COP.
13B Turbo MS2extra.
Re: What's everyone upto nowadays?
Then I can use the CAS, 36-1 wheel, Semi-sequential injection and wasted spark DFI.